Ultra high pressure systems requires high demands on the quality of the involved components. Therefore you should always choose REHOBOT approved accessories.
(1) Removal of nipple AAU436 gives G1/4″ internal thread with
120° sealing cone.
(2) Adapter is required: AAU241 , AAU242 or AAU243.
* Female Thread with internal 120° sealing cone
** Flow capacity is measured at 0.4 MPa (4 bar) pressure drop.
Metric measurements
| Name | Item code | Type | Gender | Max working pressure MPa | Inner thread | Outer thread | Flow capacity l/min** |
| AQI150 | 49450 | Insert | Female | 150 | G 1/4″ * | — | 6 |
| AQI250 | 46574 | Insert | Female | 250 | G 1/4″ * | (2) | 4.6 |
| AQU150 | 46573 | Insert | Male | 150 | (1)* | G 1/4″ | 6 |
| AQU250 | 46575 | Insert | Male | 250 | G 1/4″ * | (2) | 4.6 |
Imperial measurements
| Name | Item code | Type | Gender | Max working pressure psi | Inner thread | Outer thread | Flow capacity gal/min** |
| AQI150 | 49450 | Insert | Female | 21750 | G 1/4″ * | — | 1.6 |
| AQI250 | 46574 | Insert | Female | 36250 | G 1/4″ * | (2) | 1.2 |
| AQU150 | 46573 | Insert | Male | 21750 | (1)* | G 1/4″ | 1.6 |
| AQU250 | 46575 | Insert | Male | 36250 | G 1/4″ * | (2) | 1.2 |
