Hand pumps PHS

The REHOBOT two stage PHS hand pumps come equipped with a pressure gauge as standard. This gives the user precise and safe control over the work carried out. The gauge is directly mounted onto the pump and well protected by the specially designed pump lever. The two stage function makes the pump easier to operate, permitting the cylinder or hydraulic tool to reach its working position significantly faster compared with single stage pumps.

  • Hydraulic return connection port standard on all pumps.
  • Robust aluminium tank with low weight and simple oil filling.
  • Needle release valve ensures precise control over lowering operation.
  • Mounting holes for fixed installations and handle locking system for easy carrying.

The pumps with 70 MPa working pressure can also be supplied with a pre-assembled hydraulic hose (LS201ES / LS301ES / LS250ES), swivel coupling (ASE10) and quick coupling (AQI7). The names of these kits ends with «/LSxxx».

Pressure gauge with item code 50777 is used on all models of PHS-pumps except:

  • PHS100-xxxx & PHS150-xxxx using pressure gauge TX104
  • PHS150-1000L & PHS150-2400L using pressure gauge AMT151
  • PHS240-2400L using pressure gauge AMT301.
  • A field installable gauge guard (item code 51085) is available for use with the pumps using the AMT151 or AMT301 gauge.

* PHS240-2400L and PHS280-2400L are designed for ultra high pressures. All additional components and accessories need to be selected for use with ultra high pressures e.g. equipped with a conical sealing principle. The hydraulic pressure port connection interface on the PHS240-2400L and PHS280-2400L is a 9/16″ — 18 UNF thread port with 60º internal cone. The pressure return connection is a G1/4″ internal threaded port.

Note: The hydraulic pressure and return connection interfaces on all other PHS pumps are constituted by two G1/4″ threaded ports.

Technical tip: When accessories are selected to a hydraulic system, the working pressure rating for these shall be equal to or higher than the pump unit,s maximum working pressure. For hoses we recommend a 3-4 fold safety margin between the hydraulic system’s maximum operating pressure and the burst pressure of the hose. It is also important to ensure that the pump’s effective oil volume exceeds the total volume of oil in the hydraulic system, preferably with a safety margin of about 20%.

Metric measurements

Name Item code Working press. MPa Eff. oil vol. cm³ Cap. cm³/stroke high Cap. cm³/stroke low Pump force N Weight kg
PHS70-300 44411 70 300 1 20 350 6
PHS70-300/LS201 44418, Hose length = 2m 70 300 1 20 350 7.4
PHS70-1000 44400 70 1000 2 20 320 8.1
PHS70-1000/LS201 44414, Hose length = 2m 70 1000 2 20 320 9.5
PHS70-1000/LS250 44419, Hose length = 2.5 m (Hydraulic hose Flex) 70 1000 2 20 320 9.5
PHS70-1000/LS301 44417, Hose length = 3m 70 1000 2 20 320 9.7
PHS70-2400 44405 70 2400 2 20 320 9.9
PHS70-2400/LS201 44413, Hose length = 2 m 70 2400 2 20 320 11.4
PHS70-4100 50605 70 4100 2 20 320 13.7
PHS80-300 44412 80 300 1 20 400 6
PHS80-1000 44401 80 1000 2 20 360 8.1
PHS80-2400 44406 80 2400 2 20 360 9.9
PHS80-4100 50606 80 4100 2 20 360 13.7
PHS100-1000 44402 100 1000 1 20 230 8.3
PHS100-2400 44407 100 2400 1 20 230 10.1
PHS150-1000 44403 150 1000 1 20 370 8.3
PHS150-1000L 44899 150 1000 1 20 370 8.5
PHS150-2400 44408 150 2400 1 20 370 10.1
PHS150-2400L 44903 150 2400 1 20 370 10.3
PHS240-2400L* 44910 240 2400 0.7 20 460 10.3
PHS280-2400L* 44912 280 2400 0.7 20 540 10.5

Imperial measurements

Name Item code Working press. psi Eff. oil vol. in³ Cap. in³/stroke high Cap. in³/stroke low Pump force N Weight lbs
PHS70-300 44411 10000 18.3 0.1 1.2 350 13.2
PHS70-300/LS201 44418, Hose length = 2m 10000 18.3 0.1 1.2 350 16.3
PHS70-1000 44400 10000 61 0.1 1.2 320 17.9
PHS70-1000/LS201 44414, Hose length = 2m 10000 61 0.1 1.2 320 20.9
PHS70-1000/LS250 44419, Hose length = 2.5 m (Hydraulic hose Flex) 10000 61 0.1 1.2 320 20.9
PHS70-1000/LS301 44417, Hose length = 3m 10000 61 0.1 1.2 320 21.4
PHS70-2400 44405 10000 146.5 0.1 1.2 320 21.8
PHS70-2400/LS201 44413, Hose length = 2 m 10000 146.5 0.1 1.2 320 25.1
PHS70-4100 50605 10000 244.1 0.1 1.2 320 30.2
PHS80-300 44412 11600 18.3 0.1 1.2 400 13.2
PHS80-1000 44401 11600 61 0.1 1.2 360 17.9
PHS80-2400 44406 11600 146.5 0.1 1.2 360 21.8
PHS80-4100 50606 11600 244.1 0.1 1.2 360 30.2
PHS100-1000 44402 14500 61 0.1 1.2 230 18.3
PHS100-2400 44407 14500 146.5 0.1 1.2 230 22.3
PHS150-1000 44403 21750 61 0.1 1.2 370 18.3
PHS150-1000L 44899 21750 61 0.1 1.2 370 18.7
PHS150-2400 44408 21750 146.5 0.1 1.2 370 22.3
PHS150-2400L 44903 21750 146.5 0.1 1.2 370 22.7
PHS240-2400L* 44910 34800 146.5 0.1 1.2 460 22.7
PHS280-2400L* 44912 40600 146.5 0.1 1.2 540 23.1

Technical documentation

Dimensional drawing (446766)

Operating instruction (MA65281)